JRZ RS PRO 3 triple adjustable damper with external reservoir for the Toyota Supra A90 (2019-2026). Rear coilover configuration. Adds a low speed compression circuit to the RS PRO platform, separating bump response from body control for the ultimate street-to-track setup. Built to order through Meisterschaft Motorsport Engineering, the official U.S. importer of JRZ Suspension. Every set includes expert setup consultation for your Toyota.
The JRZ RS PRO3 Coilovers Toyota Supra A90 are the most adjustable damper in the JRZ RS line — built around JRZ triple-adjustable technology that separates low-speed compression, high-speed compression, and rebound into three independent controls. For builds where a divorced spring layout is preferred, see the divorced springs configuration.
The RS PRO3 is the most adjustable damper in the JRZ RS line. Where the RS PRO gives you two knobs — high-speed compression and rebound — the RS PRO3 adds a dedicated low-speed compression circuit. That third adjustment separates body control (roll, pitch, squat) from bump response (kerbs, surface changes, transitions), so you can dial in ride quality without compromising chassis stability.
Three independent adjustments mean you’re not trading ride quality for grip. Each knob does one job, and every click is noticeable and proportional.
On a double-adjustable damper, compression is one circuit — you’re adjusting everything from parking lot speeds to hitting kerbs with the same knob. The RS PRO3 splits compression into two ranges. Low-speed compression handles the slow shaft velocities that cause body roll, brake dive, and acceleration squat. High-speed compression handles the fast shaft velocities from impacts, kerbs, and rough surfaces.
In practice, this means you can stiffen body control for faster transitions without making the car harsh over bumps. It’s the adjustment that makes the biggest difference for drivers who use their car on both street and track — you can run a firm, responsive setup through corners without punishing your spine on the drive to the circuit.
The A90 Supra’s B58 inline-six and short wheelbase make it responsive but demanding on suspension. Under hard track use, twin-tube dampers without a reservoir will heat-soak during a 20-minute session and fade — you lose consistency exactly when you need it most. The RS PRO3’s remote reservoir adds fluid volume and cooling surface area, keeping damping forces stable from your first lap to your last.
The adjustable gas pressure also lets you fine-tune cavitation resistance based on your spring rates and driving style — something no sealed twin-tube can offer. For Supra owners pushing the car on track days, time attacks, or spirited canyon roads, the RS PRO3 delivers the most adjustment range available in the RS line.
Fits 2019-2026 Toyota Supra A90 (all variants including 2.0T and 3.0T). Valving and spring selection are tailored to the Supra’s front-engine, rear-drive weight distribution and multi-link suspension geometry. We recommend a full four-wheel alignment and corner balance after installation at a shop experienced with performance suspension setups.
| DAMPER TYPE | Triple-adjustable monotube coilover with remote reservoir |
| CONFIGURATION | Rear coilover — also available in divorced spring setup (see separate listing) |
| ADJUSTMENTS | High-speed compression (14 clicks), low-speed compression (8 clicks), and rebound (21 clicks) — three independent adjustments |
| FITMENT | Toyota Supra A90, 2019-2026 (all variants) |
| VALVING | Meisterschaft spec — optimised for A90 Supra weight distribution |
| SPRING PACKAGE | Optional — Street, Street/Track Hybrid, Track, or Custom rates |
| SHAFT | 22mm standard, 25mm hard-chrome upgrade available |
| FA3030 UPGRADE | Available Front, Rear, or Front and Rear |
| LOW-FRICTION COATING | Available Front, Rear, or Front and Rear |
| QUICK DISCONNECTS | Front standard, rear optional add-on |
| FRONT CAMBER PLATES | JRZ adjustable camber plates (p/n 99 033 A90 01) |
| REAR TOP MOUNTS | JRZ rear top mounts (p/n 95 60 07 52) |
| GAS PRESSURE | Adjustable via remote reservoir |
| SERVICE | Fully rebuildable and revalveable at Meisterschaft Motorsport |
| BUILD TIME | 2-4 weeks from order, depending on JRZ production schedule |
Tell us how you drive the car and we’ll spec it for you.
Reviews
There are no reviews yet.