New lower pricing is live — we worked with JRZ to bring prices down across the entire range. New lower JRZ pricing is live. Shop JRZ →
Meisterschaft Motorsport Engineering logo
Menu
JRZ RS PRO Coilovers - BMW 1 series non M E81/E87/E88 (2005-2013) - Meisterschaft Motorsport
JRZ RS PRO Coilovers - BMW 1 series non M E81/E87/E88 (2005-2013) - product detail 1

BMW

M4

|

F8X

2014 -

2019

RS PRO

|

$6,875.00

SKU: MME-JRZ-00125

In Stock

Add JRZ Front Camber plates *

JRZ Camber Plate 3/5 bolt 95 60 03 13/95 60 03 19

Add JRZ Rear Top Mounts*

JRZ Top Mount 95 60 07 39

Full Spring Package*

Add on 25mm Shaft upgrade*

Add on FA3030 Upgrade*

Add on Shaft Low Friction Coating*

Quick Disconnects Rear

Add on Rear Quick Disconnects*

Allows for easier routing of canister into the chassis.

Add JRZ PROlift Nose-Lift Kit*

Total: $6,875.00

Built to Order

2-4 week lead time

JRZ Factory

Hand built in the Netherlands

Rebuildable

Full service & revalve support

Setup Help

We help you dial it in

JRZ RS PRO double adjustable damper with external reservoir for the BMW M4 F82 (2014-2019). 21 clicks of rebound and 14 clicks of compression adjustment for precise tuning across street and track conditions. The external reservoir provides consistent damping under sustained hard driving. Built to order through Meisterschaft Motorsport Engineering, the official U.S. importer of JRZ Suspension. Every set includes expert setup consultation for your BMW.

WHY THE RS PRO FOR THE BMW M4 F8X

JRZ RS PRO Coilovers BMW M4 F8X — triple-adjustable motorsport damping built to order in the Netherlands by JRZ Suspension Engineering. Every unit is hand-assembled and dyno-validated before shipping. Browse all JRZ coilovers.

The JRZ RS PRO Coilovers for the BMW M4 F82 deliver double-adjustable damping with independent compression and rebound control through a race-specification mono-tube body and remote reservoir. Engineered and assembled by JRZ Suspension Engineering in the Netherlands, the RS PRO is built for drivers pushing the F82 in competitive environments where consistent, tuneable damping is non-negotiable. For street-focused setups see the 11 Series or 12 Series, or step up to the triple-adjustable RS PRO3.

WHY THE RS PRO EXISTS

The RS PRO sits at the boundary between advanced street/track and full competition. It uses the same mono-tube architecture and remote reservoir design as JRZ’s professional racing dampers, but with valving accessible enough for privateer teams and serious track-day drivers. Two independent dials — compression and rebound — give you precise control without the complexity of a three-way system.

  • Double-adjustable damping — independent compression and rebound dials let you tune weight transfer and recovery separately for different circuits and conditions
  • Race-spec mono-tube with remote reservoir — high-flow piston design and oversized reservoir maintain consistent damping force through extended sessions at race pace
  • Application-specific valving — every F82 RS PRO kit ships with damper curves matched to the car’s weight, wheelbase, and spring rates — not generic aftermarket settings
Not sure which series?
The RS PRO is JRZ’s double-adjustable monotube with external reservoir — the most capable double-adjustable option in the RS line. The RS PRO3 adds triple adjustment with high/low-speed compression separation. Above the RS line, the 11 Series and 12 Series offer full motorsport-grade performance.

HAND BUILT IN THE NETHERLANDS

Every JRZ RS PRO damper is assembled, valved, and dyno-tested by hand at JRZ’s facility in the Netherlands. There is no mass production line — each unit is built to order with tolerances held to the same standard used in GT3 and prototype racing programs. The result is a damper that arrives ready to install with no bleeding, shimming, or break-in required.

BMW M4 F82 COILOVERS FITMENT

This kit fits all 2014–2019 BMW M4 F82 variants. Ships as a complete four-corner coilover system with your choice of spring package: Street, Street/Track Hybrid, Track, or custom rates to suit your setup.

SPEC SHEET

DAMPER TYPE Double-adjustable (compression, rebound)
ADJUSTMENTS Compression, rebound
DESIGN Mono-tube, remote reservoir
FITMENT BMW M4 F82, 2014–2019
VALVING Application-specific, dyno-tested
SPRING PACKAGE Street, Street/Track Hybrid, Track, or Custom rates
QUICK DISCONNECTS Front standard
FRONT CAMBER PLATES Available separately
REAR TOP MOUNTS Vehicle-specific
INSTALLATION Direct bolt-on replacement for OEM dampers
SERVICE Fully rebuildable and revalveable at Meisterschaft Motorsport
BUILD TIME 2–4 weeks from order, depending on JRZ production schedule

FREQUENTLY ASKED QUESTIONS

What is the difference between the RS PRO and RS PRO3?
The RS PRO is double-adjustable (compression and rebound), offering precise tuning with a simpler interface. The RS PRO3 is triple-adjustable (high-speed compression, low-speed compression, and rebound), splitting compression into two independent controls for maximum tuning resolution at the highest levels of competition.
Will the RS PRO work with my factory adaptive damping?
The JRZ RS PRO replaces the factory dampers entirely. If your M4 has adaptive suspension (EDC), the JRZ coilovers bypass that system. You gain a purpose-built race-spec damper with manual compression and rebound adjustment in place of the electronically controlled factory units.
Can I adjust the ride height?
Yes. The coilover design allows full ride height adjustment at all four corners. Spring preload and ride height are set independently, so you can lower the car without compromising spring performance.
How long does it take to receive my order?
Build time is typically 2–4 weeks from order, depending on JRZ’s production schedule. Every damper is built to order and dyno-verified before shipping.
Can the dampers be rebuilt or revalved?
Yes. Every JRZ RS PRO damper is fully rebuildable and revalveable. Meisterschaft Motorsport handles all service in-house — whether you need a refresh after heavy track use or want the valving adjusted for a different spring rate or driving style.

NEED HELP CHOOSING?

Not sure which JRZ series is the right fit for your F82 M4? Contact us for a no-pressure conversation about your driving goals, spring rate preferences, and setup — we will help you get it right the first time.

GIVE US A CALL GET SETUP ADVICE

JRZ RS PRO Coilovers - BMW M4 F8X (2014-2019)

☎ (954) 408-2280

Contact us for pricing

\n \n
$6,875.00