Meisterschaft Motorsport Engineering logo
JRZ 11 Series Coilovers - BMW 1 series non M E81/E87/E88 (2005-2013) - Meisterschaft Motorsport
JRZ 11 Series Coilovers - BMW 1 series non M E81/E87/E88 (2005-2013) - product detail 1

Chevrolet

Z06

|

C8

2020 -

2027

11 series

|
Coilovers

$8,190.00

SKU: MME-JRZ-00448

In Stock

Add JRZ Front Camber plates *

JRZ Camber Plate 99-008-080-1

Add JRZ Rear Top Mounts*

JRZ Top Mount 99-008-080-1

Full Spring Package*

Add on 25mm Shaft upgrade*

Add on FA3030 Upgrade*

Add on Shaft Low Friction Coating*

Total: $8,190.00

Built to Order

2-4 week lead time

JRZ Factory

Hand built in the Netherlands

Rebuildable

Full service & revalve support

Setup Help

We help you dial it in

JRZ 11 Series double adjustable motorsport damper for the Chevrolet Z06 C8 (2020-2027). Purpose-built for competition with independent compression and rebound adjustment, blow-off valve technology for unsprung mass control, and the JRZ 8060 motorsport piston for linear damping. Built to order through Meisterschaft Motorsport Engineering, the official U.S. importer of JRZ Suspension. Every set includes expert setup consultation for your Chevrolet.

WHY THE 11 SERIES FOR THE CHEVROLET Z06 C8

JRZ 11 Series Coilovers Chevrolet Z06 C8 — triple-adjustable motorsport damping built to order in the Netherlands by JRZ Suspension Engineering. Every unit is hand-assembled and dyno-validated before shipping. Browse all JRZ coilovers.

The JRZ 11 Series Coilovers Chevrolet Z06 C8 deliver motorsport-grade double-adjustable damping to the mid-engine Corvette platform. Built on JRZ monotube technology with a high-volume remote reservoir, the 11 Series offers independent compression and rebound control across a fully usable range. For builds that need a more compact piggyback layout, see the 12 Series or the triple-adjustable RS PRO3.

WHY THE JRZ 11 SERIES FOR YOUR Z06 C8?

The C8 Z06 mid-engine layout puts extreme demands on damper response. The flat-plane-crank LT6 delivers power differently than a traditional pushrod V8, and the rear-biased weight distribution means dampers need to manage higher rear loads while keeping the front end responsive through direction changes. The JRZ 11 Series was designed for exactly this kind of challenge.

  • Double-adjustable monotube — independent compression and rebound tuning with the JRZ 8060 motorsport piston and blow-off valve
  • Remote reservoir — high-volume canister increases oil capacity and heat dissipation for sustained track sessions
  • Quick-disconnect fittings — service the reservoir without removing the damper from the car
  • Full usable range — every click produces a noticeable, repeatable change in damping force
Not sure which series?
The 11 Series is JRZ’s motorsport-grade double-adjustable damper, sitting above the entire RS line in the JRZ hierarchy. For triple-adjustable motorsport control, step up to the 12 Series. For street/track alternatives, the RS PRO and RS PRO3 offer excellent performance from the RS line.

HAND BUILT IN THE NETHERLANDS

Every JRZ 11 Series kit is assembled by hand at JRZ Suspension Engineering in Eindhoven. Pistons are lapped, shims are stacked to Meisterschaft specifications for the Z06 C8 weight and suspension geometry, and each damper is dyno-verified before it leaves the factory. This is not mass production — it is precision manufacturing with your car setup requirements built into every unit.

JRZ 11 SERIES COILOVERS CHEVROLET Z06 C8 FITMENT

This kit is engineered as a direct fit for the 2020-2027 Chevrolet Corvette Z06 C8. Valving is optimised for the Z06 weight distribution and suspension geometry, and each kit ships with all necessary hardware for a bolt-on installation. Spring packages are available in Street, Street/Track Hybrid, Track, and Custom rate configurations.

SPEC SHEET

DAMPER TYPE Double-adjustable monotube — JRZ 8060 motorsport piston with blow-off valve
RESERVOIR Remote — high-volume canister with quick-disconnect fittings
ADJUSTMENTS Compression and rebound — two independent adjustments
FITMENT Chevrolet Corvette Z06 C8, 2020-2027
VALVING Meisterschaft spec — optimised for Z06 C8 weight distribution
SPRING PACKAGE Optional — Street, Street/Track Hybrid, Track, or Custom rates
SHAFT 22mm standard, 25mm hard-chrome upgrade available
FA3030 UPGRADE Available Front, Rear, or Front and Rear
LOW-FRICTION COATING Available Front, Rear, or Front and Rear
QUICK DISCONNECTS Yes
CAMBER PLATES Optional front camber plates available
REAR TOP MOUNTS Optional JRZ rear top mounts available
BUILT Hand-assembled at JRZ Suspension Engineering, Eindhoven, Netherlands

FAQ

What is the difference between the 11 Series and the 12 Series?
The 11 Series uses a remote reservoir connected by hoses, which increases oil volume and heat capacity. The 12 Series uses a piggyback reservoir mounted directly to the damper body — more compact, but with slightly less oil volume. Both share the same JRZ 8060 piston technology and double-adjustable damping.
Will these fit the standard C8 Stingray?
This kit is valved specifically for the Z06 C8. While the mounting points are shared across the C8 platform, the valving is optimised for the Z06 weight and suspension geometry. Contact us if you drive a Stingray — we can recommend the correct setup.
What spring rates should I choose?
That depends on how you use the car. Street packages are tuned for daily comfort with improved body control. Street/Track Hybrid splits the difference. Track packages are stiffer and designed for circuit use. Contact Meisterschaft and we will recommend rates based on your driving style and goals.
Can I rebuild these?
JRZ dampers are fully rebuildable. Meisterschaft Motorsport handles all service and revalving in-house. We can also re-spec the valving if your use case changes — for example, moving from street to dedicated track use.
What are quick disconnects?
Quick-disconnect fittings let you detach the remote reservoir hoses without removing the damper from the car. This makes servicing faster and cleaner, especially on cars that see regular track use.
How long is the lead time?
JRZ dampers are built to order. Typical lead time is 2-4 weeks from the date your order is placed. Contact us for current availability.

NEED HELP CHOOSING?

Tell us about your Z06 and how you use it — we will recommend the right JRZ platform, spring rates, and options.

GIVE US A CALL EXPLORE JRZ

JRZ 11 Series Coilovers - Chevrolet Z06 C8 (2020-2027)

☎ (954) 408-2280

Contact us for pricing

\n \n \n
$8,190.00