New lower pricing is live — we worked with JRZ to bring prices down across the entire range. New lower JRZ pricing is live. Shop JRZ →
Meisterschaft Motorsport Engineering logo
Menu
JRZ RS PRO Coilovers - BMW 1 series non M E81/E87/E88 (2005-2013) - Meisterschaft Motorsport
JRZ RS PRO Coilovers - BMW 1 series non M E81/E87/E88 (2005-2013) - product detail 1

Porsche

911 GT3RS

|

996

2001 -

2004

RS PRO

|

$7,175.00

SKU: MME-JRZ-00360

In Stock

Add JRZ Front Camber Plates *

JRZ Camber plate 95 40 01 04

Add JRZ Rear Top Mounts*

JRZ Top Mount 95 40 01 09

Full Spring Package*

Add on 25mm Shaft upgrade*

Add on FA3030 Upgrade*

Add on Shaft Low Friction Coating*

Quick Disconnects Rear

Add on Rear Quick Disconnects*

Allows for easier routing of canister into the chassis.

Add JRZ PROlift Nose-Lift Kit*

Total: $7,175.00

Built to Order

2-4 week lead time

JRZ Factory

Hand built in the Netherlands

Rebuildable

Full service & revalve support

Setup Help

We help you dial it in

JRZ RS PRO double adjustable damper with external reservoir for the Porsche 911 GT3RS 996 (2001-2004). 21 clicks of rebound and 14 clicks of compression adjustment for precise tuning across street and track conditions. The external reservoir provides consistent damping under sustained hard driving. Built to order through Meisterschaft Motorsport Engineering, the official U.S. importer of JRZ Suspension. Every set includes expert setup consultation for your Porsche.

WHY THE RS PRO FOR THE PORSCHE 911 GT3RS 996

JRZ RS PRO Coilovers Porsche 911 GT3RS 996 — triple-adjustable motorsport damping built to order in the Netherlands by JRZ Suspension Engineering. Every unit is hand-assembled and dyno-validated before shipping. Browse all JRZ coilovers.

The JRZ RS PRO Coilovers for the Porsche GT3RS 996 (2001-2004) bring professional-grade 3-way adjustable damping to the original GT3RS platform. The RS PRO features a monotube body with an integrated piggyback reservoir, delivering independent compression, rebound, and high-speed adjustment for granular control over every aspect of damper behavior. Valved specifically for the 996 GT3RS’s naturally aspirated flat-six and lightweight, focused chassis, this is JRZ’s workhorse race damper. Explore the full GT3RS 996 lineup including the JRZ PROactive, JRZ 11 Series, JRZ 12 Series, JRZ RS ONE, and JRZ RS PRO3.

Why Choose JRZ RS PRO Coilovers for Your GT3RS 996?

  • 3-way adjustable — Independent low-speed compression, high-speed compression, and rebound adjustment for complete damping control
  • Piggyback reservoir — Increased oil volume and heat capacity in a self-contained package with no external hose lines
  • Monotube construction — Direct piston-to-oil contact eliminates cavitation and delivers precise, repeatable damping
  • GT3RS-specific valving — Tuned for the 996 GT3RS’s weight, center of gravity, and track-oriented suspension geometry
  • Race-proven platform — The RS PRO is JRZ’s most popular professional motorsport damper, adapted for the GT3RS
  • Built to order — Each set is assembled and dyno-tested at JRZ in the Netherlands to your specifications
Not sure which series?
The RS PRO is JRZ’s double-adjustable monotube with external reservoir — the most capable double-adjustable option in the RS line. The RS PRO3 adds triple adjustment with high/low-speed compression separation. Above the RS line, the 11 Series and 12 Series offer full motorsport-grade performance.

Hand Built by JRZ in the Netherlands

Every JRZ RS PRO kit is assembled by hand at JRZ Suspension Engineering in Eindhoven. Damper bodies are CNC-machined from aerospace-grade aluminum, pistons are application-specific, and each unit is individually dyno-tested before shipping. The 3-way adjustment architecture gives you independent control over low-speed compression, high-speed compression, and rebound — the same level of tuning available to professional race teams using JRZ dampers in competition.

JRZ RS PRO Coilovers Fitment — Porsche GT3RS 996

This kit is designed exclusively for the 2001-2004 Porsche 911 GT3RS 996 platform. JRZ engineers each application from the ground up — spring rates, valving, and reservoir configuration are calibrated for the GT3RS’s specific weight distribution, suspension geometry, and performance envelope. The result is a bolt-on system that integrates seamlessly with the GT3RS 996 chassis.

Spec Sheet

VEHICLE Porsche GT3RS 996 (2001-2004)
DAMPER BODY Monotube, piggyback reservoir
BODY MATERIAL CNC-machined aerospace-grade aluminum
PISTON Application-specific, dyno-tuned
ADJUSTMENT 3-way — low-speed compression, high-speed compression, and rebound
SPRING RATE Application-specific, set by JRZ for the GT3RS 996
RIDE HEIGHT Adjustable via threaded body
QUICK DISCONNECTS Non-inverted / standard
MOUNTING Vehicle-specific top mounts and hardware included
DUST BOOT Included
SERVICE Fully rebuildable and revalveable by JRZ or authorized service centers
WARRANTY JRZ factory warranty
ORIGIN Built to order — JRZ Suspension Engineering, Eindhoven, Netherlands

Frequently Asked Questions

What does 3-way adjustable mean on the RS PRO?
3-way means you can independently adjust low-speed compression, high-speed compression, and rebound. Low-speed compression controls body roll and pitch under normal driving. High-speed compression controls how the damper reacts to sharp impacts like curbs and bumps. Rebound controls how quickly the suspension extends after being compressed.
How is the RS PRO different from the 12 Series?
Both use a piggyback reservoir design, but the 12 Series is 2-way adjustable (compression and rebound) while the RS PRO adds a third adjustment for high-speed compression. This gives you finer control over how the damper handles sharp impacts separately from body control — critical for aggressive track driving on the GT3RS.
How long does a JRZ RS PRO build take?
Each RS PRO kit is built to order at JRZ in the Netherlands. Typical lead time is 4-6 weeks depending on current production schedules. Contact us for the most current estimate.
Can I have the RS PRO revalved for different spring rates?
Yes. JRZ dampers are fully rebuildable and revalveable. If you change spring rates or modify the car’s weight, JRZ can re-dyno and revalve the dampers to match the new setup.
Is the RS PRO overkill for occasional track days?
That depends on how you use the car. If you want maximum tuning flexibility and plan to refine your setup over time, the RS PRO’s 3-way adjustment is a significant advantage. If you prefer a simpler setup with fewer adjustments, the 12 Series gives you excellent performance with 2-way control.

Need Help Choosing the Right JRZ Setup?

Not sure whether the RS PRO is the right choice for your GT3RS 996? We can help you decide based on your driving style, track goals, and budget.

Contact Us
View All JRZ Products

JRZ RS PRO Coilovers - Porsche 911 GT3RS 996 (2001-2004)

☎ (954) 408-2280

Contact us for pricing

\n \n
$7,175.00